Coating Standard for the Oil & Gas Industry

Abbreviations

ABS American Bureau of Shipping

ABNT Associação Brasileira de Normas Técnicas AFNOR Association Française de Normalisation ASME American Society of Mechanical Engineers ANSI American National Standards Institute

API American Petroleum Institute AWWA American Water Works Association BS British Standards

CEN European Committee for Standardization CSA Canadian Standards Association

DNV Det Norske Veritas (Norway)

DIN German Institute for Standardization

EEMUA Engineering Equipment & Materials Users’ Association EFC European Federation of Corrosion

EN European Norm

GCC Cooperation Council for the Arab States of the Gulf

GSO Gulf Standardization Organization for the Cooperation Council for the Gulf Arab States IEC International Electrotechnical Commission

IMO International Maritime Organization EEMUA Instrumentation and Control Committee IS Indian Standard

ISO International Organization for Standardization NACE National Association of Corrosion Engineers (US) NF National French Standard

NORSOK Norwegian Competitive Position on the Continental Shelf NPD Norwegian Petroleum Directorate

NS Norwegian Standard

OCIMF Oil Companies International Marine Forum OCMA Oil Companies Materials Association

OGP International Association of Oil & Gas Producers OLF Norwegian Oil Industry Association

PAS Publicly Available Specification (ISO) PIP Process Industry Practices (US)

PSA Petroleum Safety Authority (Norway)

RAL German Reichsausschuß für Lieferbedingungen und Gütesicherung SDO Standards Developing Organization

SFS Finnish Standards Association SSPC Society for Protective Coatings (US) STG Specific Technology Groups

TBL Federation of Norwegian Manufacturing Industries TEG Technology Exchange Groups

TC Technical Committee

TF Task Force

TG Task Group

UKOOA UK Offshore Operator Association (Now UK Oil & Gas) VDI Association of German Engineers

WG Working Group

Coating standards Available with Us.

The essential and explicit covering guidelines for the oil and gas industry are singled out in section 1.0 beneath, as these norms are the obligation of the covering specialists of the oil and gas industry local area to create and keep up, and no one else.

A considerable lot of the references in passage 2.0 underneath are for the most part material covering and paint related norms not explicitly made for the oil and gas industry, yet they are habitually utilized by the covering discipline and thus inclined to check on the off chance that they are usually referred to by the worldwide oil and gas industry for their individual and explicit purposes.

1.0 Covering standards of Coating for the oil and gas industry

API Bull 91 Planning and Conducting Surface Preparation and Coating Operations for Oil and Natural Gas Drilling and Production Facilities in a Marine Environment

API RP 5L2 RP for Internal Coating of Line Pipe for Non-Corrosive Gas Transmission Service

API RP 5L7 RP for Un-primed Internal Fusion Bonded Epoxy Coating of Line Pipe

API RP 5L9 External Fusion Bounded Epoxy Coating of Line Pipe

API RP 652 Linings of Aboveground Petroleum Storage Tank Bottoms

API 1160 Managing system integrity for hazardous liquid pipelines

API 2217A Guidelines for Work in Inert Confined Spaces in the Petroleum Industry

ASTM 06.02 Paint-Products and Applications; Protective Coatings; Pipeline Coatings

ASTM G 8 Test method for cathodic disbanding of pipeline coatings

ASTM G14 Standard Test Method for Impact Resistance of Pipeline Coatings (Fall- ing Weight Test).

ASTM G17 Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod).

DNV RP-F102 Pipeline field joint coating and field repair of line pipe coating

DNV RP–F106 Factory applied external pipeline coatings for corrosion control.

EN 10288 Steel Tubes and Fittings for Onshore and Offshore Pipelines – External Two Layer Extruded Polyethlene Based Coatings

EN 10289 Steel Tubes and Fittings for Onshore and Offshore Pipelines – External Liquid Applied Epoxy and Epoxy-Modified Coatings

EN 10290 Steel Tubes and Fittings for Onshore and Offshore Pipelines External Liquid Applied Polyurethane and Polyurethane-Modified Coatings

EN 10300 Steel tubes and fittings for onshore and offshore Pipelines – Bituminous hot applied materials for external coating

EN 10301 Steel tubes and fittings for on and offshore pipelines – Internal coating for the reduction of friction for conveyance of non corrosive gas

EN 10310 Steel tubes and fittings for onshore and offshore pipelines – Internal and external polyamide powder based coatings

EN 10329 Steel tubes and fittings for onshore and offshore pipelines – External field joint coatings

EEMUA 194 Guidelines for Materials Selection and Corrosion Control for Subsea Oil and Gas Production Equipment

ISO 15741 Paints and varnishes – Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases

ISO 20340 Paints and varnishes – Performance requirements for protective paint systems for offshore and related structures

ISO 21809 Petroleum and natural gas industries – External coatings for buried or submerged pipelines used in pipeline transportation systems:

Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (In preparation)

Part 2: Fusion-bonded epoxy coatings (issued 2007) Part 3: Field joint coatings
(issued 2008)

Part 4: Polyethylene coatings (2-Layer PE) (In preparation) Part 5: External
concrete coatings (In preparation)

NACE 30105 Electrical Isolation/Continuity and Coating Issues for Offshore Pipeline Cathodic Protection Systems

NACE RP0105 Standard Recommended Practice Liquid-Epoxy Coatings for External Repair, Rehabilitation, and Weld Joints on Buried Steel Pipelines

NACE RP-0176 Corrosion Control of Steel, Fixed Offshore Platforms Associated with Petroleum Production

NACE RP0178 Fabrication Details, Surface Finish Requirements, and Proper Design Considerations for Tanks and Vessels to be Lined for Immersion Sur- face.

NACE RP0188 Discontinuity (Holiday) Testing of Protective Coatings

NACE RP0191 Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories

NACE RP0193 External Cathodic Protection of On-Grade Carbon Steel Storage Tank Bottoms

NACE RP0198 Control of Corrosion Under Thermal Insulation and Fireproofing Materials – A Systems Approach

NACE RP0274 High-Voltage Electrical Inspection of Pipeline Coatings

NACE RP0303 Standard Recommended Practice Field-Applied Heat-Shrinkable Sleeves for Pipelines: Application, Performance, and Quality Control

NACE RP0304 Design, Installation, and Operation of Thermoplastic Liners for Oilfield Pipelines

NACE RP0375 Field-Applied Underground Wax Coating Systems for Underground Pipelines: Application, Performance, and Quality Control

NACE RP0394 Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating

NACE RP0399 Plant Applied, External Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control

NACE RP0402 Field-Applied Fusion-Bonded Epoxy (FBE) Pipe Coating Systems for Girth Weld Joints: Application, Performance, and Quality Control

NACE RP0602 Field-Applied Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control

NACE RP0892 Coatings and Linings over Concrete for Chemical Immersion and Containment Service

NACE SP0108 Corrosion Control of Offshore Structures by Protective Coatings

NACE SP0169 Control of External Corrosion on Underground or Submerged Metallic Piping Systems

NACE SP0181 Liquid-Applied Internal Protective Coatings for Oilfield Production Equipment

NACE SP0185 Extruded Polyolefin Resin Coating Systems with Soft Adhesives for Underground or Submerged Pipe

NACE SP0490 Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatings of 250 to 760 um (10 to 30 Mils)

NACE TM0102 Measurement of Protective Coating Electrical Conductance on Under- ground Pipelines

NACE TM0104 Offshore Platform Ballast Water Tank Coating System Evaluation

NACE TM0105 Test Procedures for Organic-Based Conductive Coating Anodes for Use on Concrete Structures

NACE TM0174 Laboratory Methods for the Evaluation of Protective Coatings and Linings Materials on Metallic Substrates in Immersion Service

NACE TM0185 Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods by Autoclave Testing

NACE TM0186 Holiday Detection of Internal Tubular Coatings of 250 to 760μm (10 to 30 Mils) Dry Film Thickness

NACE TM0204 Exterior Protective Coatings for Seawater Immersion Service

NACE TM0299 Corrosion Control and Monitoring in Seawater Injection Systems

NACE TM0304 Offshore Platform Atmospheric and Splash Zone Maintenance Coating System Evaluation

NACE TM0384 Holiday Detection of Internal Tubular Coatings of Less Than 250 Micrometers (10 mils) Dry-Film Thickness

NACE TM0404 Offshore Platform Atmospheric and Splash Zone New Construction Coating System Evaluation

NORSOK M-501 Surface preparation and protective coating

2.0 Generally applicable coating or related standards

ABS 49 The Inspection, Maintenance and Application of Marine Coating Systems

ABS 153 Guide for the Class Notation Coating performance standard

AFNOR NF M87-803 Oil industry – Ballast coating for pipes – Implementation.

AFNOR NF M88-516 Steel tanks with outside concrete coating for underground storage of mineral oils.

ANSI A13.1 Scheme for identification of piping systems

ANSI Z535.1 Safety Color Code

API/EI Std 1541 Performance requirements for protective coating systems used in avia- tion fuel storage tanks & piping

ASTM A 123/A123M Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

ASTM A 143 Safeguarding Against Embrittlement of Hot-Dip, Galvanized Structural Steel Products

ASTM A 153/A153M Zinc Coating (Hot-Dip) on Iron and Steel Hardware

ASTM A 385 Standard Specification for Zinc Dust Pigment

ASTM A 392 Specification for zinc-coated steel chain-link fence fabric.

ASTM A 780 Specification for repair of damaged hot-dip galvanized coatings. ASTM A 972/A972M Standard Specification for Fusion Bonded Epoxy Coated Pipe Piles ASTM B 117 Standard Practice for Operating Salt Spray (fog) Apparatus

ASTM C633 Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings (NOTE – often preferred by thermal sprayers to ASTM D4541).

ASTM D16 Standard Terminology for Paint, Related Coatings, Materials, and Applications

ASTM D 521 Test methods for chemical analysis of zinc dust (metallic zinc powder)

ASTM D 570 Standard test method for water absorption of plastics

ASTM D 610 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces.

ASTM D 638 Standard Test Method for Tensile Properties of Plastics

ASTM D 823 Method of producing films of uniform thickness of paint, varnish, lac- quer and related products on test panels

ASTM D 1000 Method of testing pressure sensitive adhesive coated tapes used for electrical insulation

ASTM D 1141 Specification for substitute ocean water

ASTM D 1186 Standard Test Methods for Non-Destructive Measurement of Dry Film Thickness of Non-Magnetic Coatings Applied to a Ferrous Base.

ASTM D 1200 Test method for viscosity of paints, varnishes and lacquers by Ford viscosity cup

ASTM D 1212 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings

ASTM D 3276 Standard Guide for Painting Inspectors (Metal Substrates)

ASTM D 1640 Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature

ASTM D 2092 Practices for preparation of zinc-coated galvanized steel structures for paint

ASTM D 2240 Standard Test Method for Rubber Property—Durometer Hardness

ASTM D 2369 Test method for volatile content of coatings

ASTM D 2371 Test method for pigment content of solvent-reducible paints

ASTM D 3359 Method for measuring adhesion by tape test

ASTM D 3418 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calor- imetry

ASTM D3451 Standard Guide for Testing Coating Powders and Powder Coatings

ASTM D 4060 Standard test method for abrasion resistance of organic coatings by the Taber abraser

ASTM D4228 Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces.

ASTM D 4285 Test method for indicating oil or water in compressor air

ASTM D 4414 Standard Practice for Measurement of Wet Film Thickness by Notch Gages

ASTM D 4417 Method C Test method for Field Measurement of Surface Profile

ASTM D 4541 Test method for pull-off strength of coatings using portable adhesion testers.

ASTM D 4752 Standard Test Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub.

ASTM D 4940 Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives

ASTM D5144 Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants

ASTM D7490 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements

ASTM E 337 Standard Test Method for Measuring Humidity with a Psychrometer (Wet and Dry Bulb Temperatures)

ASTM F 21 Standard Test Method for Hydrophobic Surface Films by Atomiser Test

ASTM G 53 Recommended practice for operating light – and water – exposure apparatus (fluorescent UV-condensation type) for exposure of nonmetallic materials

ASTM G65 Standard Test Method for Measuring Abrasion Using the Dry Sand/ Rubber Wheel Apparatus

ASTM G99 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus

AWWA C-203 Coal tar protective coatings and linings for steel water pipelines- enamel and tape-hot applied

AWWA C213 Standard for Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Lines

BS 381C Colour for Identification, Coding and Special Purposes

BS 1710 Identification of Pipelines and Services

BS 2451 Chilled Iron, Shot and Grit

BS 2482 Whirling Hygrometers

BS 3900 Methods for Testing Coatings

BS 4164 Specification for coal tar based, hot applied coating materials for protecting iron and steel including suitable primers.

BS 4800 Specification for Paint Colours for Building Purposes

BS 5378 Safety Signs and Colours: Colour and Design.

BS 5493 Code of Practice for Protective Coating of Iron and Steel against Corrosion

BS 5973 Code of Practice for Access and Working Scaffolds and Special Scaffold Structures in Steel

BS 6374 Lining of Equipment with Polymeric Materials for the Process Industries

CSA–Z245.20-06 External Fusion Bond Epoxy Coating for Steel Pipe

CSA Z245.21-06 External polyethylene coating for pipe

DIN 32521 Acceptance test and quality control for thermal spraying equipment.

DNV CN 33.1 Corrosion prevention of tanks and holds

DNV OS–F101 Submarine pipeline systems

EFC 20 Organic and Inorganic Coatings for Corrosion Prevention – Research and Experience

EFC 54 Innovative pre-treatment techniques to prevent corrosion of metallic surfaces

EN Standards CEN has adopted most of the ISO standards issued by ISO/TC35 Paints and varnishes, but for simplicity they are not shown here.

EN 582 Thermal spraying. Determination of tensile adhesive strength

EN 1403 Corrosion protection of metals – Electrodeposited coatings – Method of specifying general requirements

EN 10142 Specification for continuously hot-dip zinc coated low carbon steel sheet and strip for cold forming: technical delivery conditions

EN 10147 Continuously hot-dip zinc coated structural steels strip and sheet. Technical delivery conditions

EN 10240 Internal and/or External Protective Coatings for Steel Tubes – Specification for Hot Dip Galvanized Coatings Applied in Automatic Plants

EN 12540 Corrosion protection of metals – Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium

EN 13143 Metallic and other inorganic coatings – Definitions and conventions concerning porosity

EN 13144 Metallic and other inorganic coatings – Method for quantitative measurement of adhesion by tensile test

EN 22063 Metallic and Other Inorganic Coatings – Thermal Spraying

IMO MSC.215(82) Performance standard for protective coatings for dedicated seawater ballast tanks in all types of ships and double-side skin spaces of bulk carriers

IMO MSC.244(83) Performance standard for protective coatings for void spaces on bulk carriers and oil tankers

IMO A.798(19) Guidelines for the selection, application and maintenance of corrosion prevention systems of dedicated seawater ballast tanks

IMO MSC.1/Circ.1279 Guidelines for corrosion protection of permanent means of access arrangements

IMO MSC.1/Circ.1330 Guidelines for maintenance and repair of protective coatings

IS-5 Colour coding

IS-101 Methods for test for ready mixed paints and enamels

IS-2379 Indian Standard for Pipe line identification-colour code

ISO 62 Plastics – Determination of water absorption

ISO 179-2 Plastics – Determination of Charpy impact properties – Part 2: Instrumented impact test

ISO 306 Plasctics – Thermoplastic materials – Determination of Vicat softening temperature

ISO 527-1 Plastics – Determination of tensile properties – Part 1: General principles

ISO 527-2 Plastics – Determination of tensile properties – Part 2: Test conditions for moulding and extrusion plastics

ISO 787-10 General methods of test for pigments and extenders – Part 10: Determination of density. Pyknometer method

ISO 868 Plastics and ebonite – Determination of indentation hardness by means of a Durometer (Shore hardness)

ISO 1133 Plastics – Determination of the melt-mass flow rate (MFR) and melt- volume flow rate (MVR) of thermoplastics

ISO 1183 Plastics-Test method for determinig the density and relative density of non-cellular plastics

ISO 1461 Metallic coatings – Hot-dip galvanised coating on fabricated ferrous products

ISO 1512 Paints and varnishes – Sampling of products in liquid or paste forms

ISO 1513 Paints and varnishes – Examination and preparation of samples for test- ing

ISO 1514 Paints and varnishes – Standard panels for testing

ISO 1516 Paints and varnishes – Closed cup equilibrium method

ISO 1517 Paints and varnishes – Surface-drying test – Ballotini method

ISO 1519 Paints and varnishes – Bend test (cylindrical mandrel)

ISO 1524 Paints and varnishes – Determination of fineness of grind

ISO 2063 Thermal Spraying – Metallic and Other Inorganic Coatings – Zinc, Aluminium and Their Alloys

ISO 2080 Metallic and other inorganic coatings – Surface treatment, metallic and other inorganic coatings – Vocabulary

ISO 2409 Paints and varnishes – Cross-cut test

ISO 2431 Paints and varnishes – Determination of flow time by use of flow cups

ISO 2555 Plastics – Resins in the liquid state or as emulsions or dispersions – Determination of apparent viscosity by the Brookfield Test method

ISO 2808 Paints and varnishes – Determination of film thickness

ISO 2811 Paints and varnishes – Determination of density

ISO 2812 Paints and varnishes – Determination of resistance to liquids

ISO 2813 Paints and varnishes – Determination of specular gloss of non-metallic paint films at 20 degrees, 60 and 85 degrees.

ISO 2814 Paints and varnishes – Comparison of contrast ratio (hiding power) of paint of the same type and colour

ISO 2815 Paint and Varnishes – Buchholz Indentation Test Method

ISO 2632 Roughness Comparison Specimens, Cast Surfaces

ISO 2808 Paints and varnishes – Determination of film thickness

ISO 2814 Paints and varnishes – Comparison of contrast ratio (hiding power) of paint of the same type and colour

ISO 3001 Plastics – Epoxy compounds – Determination of epoxy equivalent

ISO 3231 Paints and varnishes – Determination of resistance to humid atmospheres containing sulphur dioxide

ISO 3233 Coating and varnishes determination of volume of dry coating obtained from a given volume of liquid coating

ISO 3251 Paints and varnishes –Determination of non-volatile matter of paints, varnishes and binders for paints and varnishes

ISO 3549 Zinc dust pigments for paints – Specifications and test methods

ISO 3678 Paints and varnishes – Print-free test

ISO 3892 Conversion coatings on metallic materials – Determination of coating mass per unit area – Gravimetric methods

ISO 4287 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Terms, definitions and surface texture parameters

ISO 4541 Metallic and other non-organic coatings – Corrodkote corrosion test

ISO 4543 Metallic and other non-organic coatings – General rules for corrosion tests applicable for storage conditions

ISO 4623 Paints and varnishes – Determination of resistance to filiform corrosion

ISO 4624 Paints and varnishes – Pull-off test for adhesion

ISO 4628 Paints and varnishes – Evaluation of degradation of paint coatings Designation of intensity, quantity and size of common types of defect

ISO 4892-2 Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc lamps

ISO 4998 Continuous hot-dip zinc-coated carbon steel sheet of structural quality

ISO 6270 Paints and varnishes – Determination of resistance to humidity

ISO 6860 Paints and varnishes – Bend test (conical mandrel)

ISO 6964 Polyolefine pipes and fittings: Determination of carbon black content by calcinations and pyrolysis: Test method and basic principles

ISO 7253 Paints and Varnishes – Determination of Resistance to Neutral Salt Spray.

ISO 7724 Paints and varnishes. Determination of colour and colour difference

ISO 8130-6 Coating powders – Part 6- Determination of gel time of thermosetting coating powders at a given temperature

ISO 8401 Metallic coatings – Review of methods of measurement of ductility

ISO 8403 Metallic coatings – Coatings anodic to the substrate – Rating of test specimens subjected to corrosion tests

ISO 8302 Thermal insulation-Determination of steady state thermal resistance and related properties-Guarded hot plate apparatus

ISO 8501 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness –

Part 1: Rust grades and preparation grades of uncoated steel substrates and of
steel substrates after overall removal of previous coatings

Part 2: Preparation grades of previously coated steel substrates after localized
removal of previous coatings

Part 3: Preparation grades of welds, edges and other areas with surface
imperfections

Part 4: Initial surface conditions, preparation grades and flash rust grades in
connection with high-pressure water jetting

ISO 8502 Preparation of steel substrates before application of paints and related products – Test for the assessment of surface cleanliness

Part 2: Laboratory determination of chloride on cleaned surfaces

Part 3: Assessment of dust on steel surfaces prepared for painting
(pressure-sensitive tape method)

Part 4: Guidance on the estimation of the probability of condensation prior to
paint application

Part 5: Measurement of chloride on steel surfaces prepared for painting (ion
detection tube method)

Part 6: Extraction of soluble contaminants for analysis – The Bresle method

Part 8: Field method for the refractometric dedetermination of moisture Part 9:
Field method for the conductometric determination of water- soluble salts

Part 11: Field method for the turbidimetric determination of water-soluble
sulfate

Part 12: Field method for the titrimetric determination of water-soluble ferrous
ions

ISO 8503 Preparation of steel substrates before application of paints and related products – Surface roughness characteristics of blast cleaned substrates. Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces

Part 2: Method for the grading of surface profile of abrasive blast- cleaned
steel – Comparator procedure

Part 3: Method for the calibration of ISO surface profile comparators and for
the determination of surface profile – Focusing microscope procedure

Part 4: Method for the calibration of ISO surface profile comparators and for
the determination of surface profile – Stylus instrument procedure

Part 5: Replica tape method for the determination of the surface profile

ISO 8504 Preparation of steel substrates before application of paints and related products – Surface preparation methods

Part 1: General principles

Part 2: Abrasive blast cleaning.

Part 3: Hand- and power-tool cleaning

ISO 9220 Metallic coatings – Measurement of coating thickness – Scanning electron microscope method

ISO 9223 Corrosion of metals and alloys. Atmospheres’ corrosivity. Classification

ISO 9227 Corrosion tests in artificial atmospheres – Salt spray tests

ISO 10308 Metallic coatings – review of porosity test

ISO 11124 Preparation of steel substrates before application of paints and related products – Specifications for metallic blast-cleaning abrasives – 4 parts

ISO 11125 Paints and varnishes – Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives – 7 parts

ISO 11126 Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives – 8 parts

ISO 11127 Paints and varnishes – Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast- cleaning abrasives – 7 parts

ISO 11295 Guidance on the classification and design of plastics piping systems used for renovation

ISO 11357-1 Plastics – Differential scanning calorimetry (DSC) – Part 1: General principles

ISO 11357-3 Plastics – Differential scanning calorimetry (DSC) – Part 3: Determination of temperature and enthalpy of melting and crystallization

ISO 12944 Paints and Varnishes – Corrosion protection of steel structures by protective paint systems

Part 2: Classification of environments

Part 3: Design considerations.

Part 4: Types of surface and surface preparation

Part 5: Protective paint systems

Part 6: Laboratory performance test methods

Part 7: Execution and supervision of paint work

Part 8: Development of specifications for new work and maintenance

ISO 14713 Protection Against Corrosion of Iron and Steel in Structures – Zinc and Aluminium Coatings – Guidelines

ISO 14918 Thermal Spraying – Approval Testing of Thermal Sprayers

ISO 16348 Metallic and other inorganic coatings – Definitions and conventions concerning appearance

ISO 19840 Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Measurement of, and acceptance criteria for, the thickness of dry film on rough surfaces

ISO 28199 Paints and varnishes – Evaluation of properties of coating systems related to the application process – 3 parts

NACE 6A100 Coatings Used in Conjunction with Cathodic Protection

NACE 6A192 Dehumudification and Temperature Control During Surface Preparation, Application, and Curing for Coatings/Linings of Steel Tanks, Vessels, and Other Enclosed Areas

NACE 6A287 Electroless Nickel Coatings

NACE 6H188 Coatings over Nonabrasive-Cleaned Steel Surfaces

NACE 10D199 Coatings for the Repair and Rehabilitation of the External Coatings of Buried Steel Pipelines

NACE 2103 Liquid-Applied Coatings for High-Temperature Atmospheric Service

NACE 37507 Corrosion Prevention by Protective Coatings

NACE 80200 Preparation of Protective Coating Specifications for Atmospheric Service

NACE NO. 4 Brush-Off Blast Cleaning

NACE NO. 5 Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating

NACE NO. 8 Industrial Blast Cleaning

NACE NO. 11 Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels

NACE RP0169 Standard Recommended Practice for Control of External Corrosion on Underground or Submerged Metallic Piping Systems

NACE RP0188 Discontinuity (holiday) testing of protective coatings

NACE RP 0274 High voltage electrical inspection of pipeline coatings prior to installation

NACE RP0287 Field Measurements of Surface Profile of Abrasive Blast Cleaned Steel Surface Using Replica Tape.

NACE RP0394 Standard Recommended Practice for Application, Performance and Quality Control of Plant Applied, Fusion-Bonded Epoxy External Pipe Coating.

NACE RP0490 Standard Recommended Practice for Holiday Detection of Fusion- Bonded Epoxy External Coating of 250 to 760 Microns (10 to 30 mils)

NACE RP0495 Guidelines for Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail Industries

NACE SP0188 Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates

NACE TM0109 Aboveground Survey Techniques for the Evaluation of Underground Pipeline Coating Condition

NACE TM0174 Laboratory Methods for the Evaluation of Protective Coatings and Lining Materials on Metallic Substrates in Immersion Service

NACE TM0183 Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment

NF A 49 710 External three layer polyethylene based coating

NF A 49 711 External triple layer polypropylene based coating – Appendix K: Test for evaluating delamination resistance under negative polarization

NF T 34 550 Paints and varnishes- Corrosion protection of steel structures by protective paints systems – Specifications

NORSOK M-001 Material selection

NORSOK S-002 Working environment

NS 476 Paints and coatings – Approval and certification of surface treatment inspectors

OCIMF International Safety Guide for Oil Tankers and Terminals

PIP CTCE1000 External Coating System Selection Criteria

PIP CTSC1000 Application of Coatings to Concrete

PIP CTSE1000 Application of External Coatings

PIP CTSL1000 Application of Internal Linings

PIP CTSU1000 Application of Underground Coatings PIP CTEG1000 Guidelines for Use of Coatings Practices PIP CTGG1000 Coatings Document Use Guideline

RAL 840 HR Deutschen Normen Auschuss

SIS 055900 Pictorial Surface Preparation Standards for Coating Steel Surfaces

SFS 8145 Anticorrosive painting, surface preparation methods of blast cleaned and shop primer coated steel substrates and preparation grades for respective treatments.

SSPC Volume 1 Good Painting Practice

SSPC Volume 2 Systems and Specifications

SSPC-SP COM, Surface Preparation Commentary for Steel and Concrete Substrates

SSPC-SP 1, Solvent Cleaning

SSPC-SP 2, Hand Tool Cleaning

SSPC-SP 3, Power Tool Cleaning

SSPC-SP 5/NACE No. 1 White Metal Blast Cleaning SSPC-SP 6/NACE No. 3 Commercial Blast Cleaning SSPC-SP 7/NACE No. 4 Brush-Off Blast Cleaning SSPC-SP 8 Pickling

SSPC-SP 10/NACE No. 2 Near-White Blast Cleaning

SSPC-SP 11 Power Tool Cleaning to Bare Metal

SSPC-SP 12/NACE No. 5 Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating

SSPC-SP 13/NACE No. 6 Surface Preparation of Concrete

SSPC-SP 14/NACE No. 8 Industrial Blast Cleaning

SSPC-SP 15 Commercial Grade Power Tool Cleaning

SSPC-TR 1/NACE 6G194 Thermal Pre-Cleaning

SSPC-TR 2/NACE 6G198 Wet Abrasive Blast Cleaning

SSPC-TR 3/NACE 6A192 Dehumidification and Temperature Control During Surface Preparation, Application, and Curing for Coatings/Linings of Steel Tanks, Vessels, and Other Enclosed Spaces

SSPC-TR 4/NACE 80200 Preparation of Protective Coating Specifications for Atmospheric Service

SSPC-TR 5/ICRI 03741/NACE 02203

Design, Installation, and Maintenance of Protective Polymer Flooring Systems for Concrete

SSPC-AB 1 Mineral and Slag Abrasives

SSPC-AB 2 Cleanliness of Recycled Ferrous Metallic Abrasives

SSPC-AB 3 Ferrous Metallic Abrasive

SSPC-PS 1.00 Guide for Selecting Oil Base Painting Systems

SSPC-PS 1.09 Three-Coat Oil Base Zinc Oxide Painting System (Without Lead or Chromate Pigment)

SSPC-PS 1.10 Four-Coat Oil Base Zinc Oxide Painting System (Without Lead or Chromate Pigment)

SSPC-PS 1.13 One-Coat Oil Base Slow Drying Maintenance Painting System (Without Lead or Chromate Pigments)

SSPC-PS Guide 2.00 Guide for Selecting Alkyd Painting Systems SSPC-PS Guide 4.00 Guide for Selecting Vinyl Painting Systems SSPC-PS 4.02 Four-Coat Vinyl Painting System

SSPC-PS 4.04 Four-Coat White or Colored Vinyl Painting System (For Fresh Water, Chemical, and Corrosive Atmospheres)

SSPC-PS Guide 7.00 Guide for Selecting One-Coat Shop Painting Systems

SSPC-PS Guide 8.00 Guide to Topcoating Zinc-Rich Primers

SSPC-PS 9.01 Cold-Applied Asphalt Mastic Painting System with Extra Thick Film

SSPC-PS 10.01 Hot-Applied Coal Tar Enamel Painting System

SSPC-PS 10.02 Cold-Applied Coal Tar Mastic Painting System

SSPC-PS 11.01 Black (or Dark Red) Coal Tar Epoxy-Polyamide Painting System

SSPC-PS Guide 12.00 Guide to Zinc-Rich Coating Systems SSPC-PS 12.01 One Coat Zinc-Rich Painting System SSPC-PS 13.01 Epoxy Polyamide Painting System SSPC-PS 14.01 Steel Joist Shop Painting System

SSPC-PS Guide 15.00 Guide for Selecting Chlorinated Rubber Painting Systems

SSPC-PS 15.01 Chlorinated Rubber Painting System for Salt Water Immersion

SSPC-PS 15.02 Chlorinated Rubber Painting System for Fresh Water Immersion

SSPC-PS 15.03 Chlorinated Rubber Painting System for Marine and Industrial Atmospheres

SSPC-PS 15.04 Chlorinated Rubber Painting System for Field Application Over a Shop- Base Inorganic Zinc-Rich Primer

SSPC-PS 16.01 Silicone Alkyd Painting System for New Steel SSPC-PS Guide 17.00 Guide for Selecting Urethane Painting Systems SSPC-PS 18.01 Three-Coat Latex Painting System

SSPC-PS Guide 19.00 Guide for Selecting Painting Systems for Ship Bottoms SSPC-PS Guide 20.00 Guide for Selecting Painting Systems for Boottoppings SSPC-PS Guide 21.00 Guide for Selecting Painting Systems for Topsides

SSPC-PS Guide 22.00 Guide for Selecting One-Coat Preconstruction or Prefabrication Paint- ing Systems

SSPC-CS 23.00/AWS C2.23M/NACE No. 12

Specification for the Application of Thermal Spray Coatings (Metalliz- ing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel

SSPC-PS 24.00 Latex Painting System for Industrial and Marine Atmospheres, Performance-Based

SSPC-PS 26.00 Aluminum Pigmented Epoxy Coating System Materials Specification, Performance-Based

SSPC-PS 27.00 Alkyd Coating System Materials Specification, Performance-Based

SSPC-Paint COM Commentary on Paint Specifications

SSPC-Paint 8 Aluminum Vinyl Paint

SSPC-Paint 9 White (or Colored) Vinyl Paint

SSPC-Paint 15 Steel Joist Shop Primer/Metal Building Primer

SSPC-Paint 16 Coal Tar Epoxy-Polyamide Black (or Dark Red) Paint

SSPC-Paint 17 Chlorinated Rubber Inhibitive Primer

SSPC-Paint 18 Chlorinated Rubber Intermediate Coat Paint

SSPC-Paint 19 Chlorinated Rubber Topcoat Paint

SSPC-Paint 20 Zinc-Rich Coating, Type I – Inorganic and Type II – Organic

SSPC-Paint 21 White or Colored Silicone Alkyd Paint

SSPC-Paint 22 Epoxy Polyamide Paints (Primer, Intermediate, and Topcoat)

SSPC-Paint 23 Latex Primer for Steel Surfaces

SSPC-Paint 24 Latex Semigloss Exterior Topcoat

SSPC-Paint 25 Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Hand Cleaned Steel

SSPC-Paint 25 BCS, Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Blast Cleaned Steel

SSPC-Paint 26 Slow-Drying Linseed Oil Black Maintenance Primer (Without Lead or Chromate Pigment)

SSPC-Paint 27 Basic Zinc Chromate-Vinyl Butyral Wash Primer SSPC-Paint 28 Water-Borne Epoxy Primer for Steel Surfaces SSPC-Paint 29 Zinc Dust Sacrificial Primer, Performance-Based SSPC-Paint 30 Weld-Through Inorganic Zinc Primer

SSPC-Paint 31 Single-Package Water-Borne Alkyd Primer for Steel Surfaces, Perform- ance-Based

SSPC-Paint 32 Coal Tar Emulsion Coating

SSPC-Paint 33 Coal Tar Mastic, Cold Applied

SSPC-Paint 34 Water-Borne Epoxy Topcoat for Steel Surfaces

SSPC-Paint 35 Medium Oil Alkyd Primer (Air Dry/Low Bake)

SSPC-Paint 36 Two-Component Weatherable Aliphatic Polyurethane Topcoat, Performance-Based

SSPC-Paint 37 Waterborne Epoxy Coating for Cementitious Substrates, Performance- Based

SSPC-Paint 38 Single-Component Moisture-Cure Weatherable Aliphatic Polyurethane Topcoat, Performance-Based

SSPC-Paint 39 Two-Component Aliphatic Polyurea Topcoat, Fast or Moderate Drying, Performance-Based

SSPC-Paint 101 Aluminum Alkyd Paint

SSPC-Paint 102 Black Alkyd Paint

SSPC-Paint 104 White or Tinted Alkyd Paint

SSPC-Paint 106 Black Vinyl Paint

SSPC-Paint 108 High-Build Thixotropic Leafing Aluminum Paint

SSPC-PA COM Commentary on Paint Application Monitoring and Controlling Ambient Conditions During Coating Operations

SSPC-PA 1 Shop, Field, and Maintenance Painting of Steel

SSPC-PA 2 Measurement of Dry Coating Thickness with Magnetic Gages

SSPC-PA 3 A Guide to Safety in Paint Application

SSPC-PA Guide 4 Guide to Maintenance Repainting with Oil Base or Alkyd Painting Systems

SSPC-PA Guide 5 Guide to Maintenance Coating of Steel Structures in Atmospheric Surface

SSPC-PA 6/NACE No. 10 Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Aboveground Storage Tanks

SSPC-PA 7 Applying Thin Film Coatings to Concrete

SSPC-PA 8/NACE No. 11 Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels

SSPC-QP COM Commentary on Qualification Procedures

SSPC-QP 1 Standard Procedure for Evaluating Painting Contractors (Field Applica- tion to Complex Industrial Structures)

SSPC-QP 2 Standard Procedure for the Qualification of Painting Contractors (Field Removal of Hazardous Coatings from Complex Structures)

SSPC-QP 3 Standard Procedure for Evaluating Qualifications of Shop Painting Applicators

SSPC-QP 4 Standard Procedure for Evaluating the Qualifications of Contractors Disturbing Hazardous Coatings During Demolition and Repair Work

SSPC-QP 5 Standard Procedure for Evaluating the Qualifications of Coating and Lining Inspection Companies

SSPC-QP 6 Standard Procedure for Evaluating the Qualifications of Contractors Who Apply Thermal Spray (Metallizing) for Corrosion Protection of Steel and Concrete Structures

SSPC-QP 7 Procedure for Evaluating Painting Contractors with Limited Industrial Work Experience

SSPC-QP 8 Standard Procedure for Evaluating the Qualifications of Contracting Firms That Install Polymer Coatings and Surfacings on Concrete and Other Cementitious Substrates

SSPC-QS 1 Standard Procedure for Evaluating a Contractor’s Advanced Quality Management System

SSPC-Guide 6 Guide for Containing Debris Generated During Paint Removal Operations

SSPC-Guide 7 Guide for the Disposal of Lead-Contaminated Surface Preparation Debris

SSPC-Guide 9 Guide for Atmospheric Testing of Coatings in the Field

SSPC-Guide 10 Guide to Specifying Coatings Conforming to Volatile Organic Com- pound (VOC) Content Requirements

SSPC-Guide 12 Guide for Illumination of Industrial Painting Projects

SSPC-Guide 13 Guide for the Identification and Use of Industrial Coating Materials in Computerized Product Databases

SSPC-Guide 14 Guide for the Repair of Imperfections in Galvanized, Organic, or Inor- ganic Zinc-Coated Steel Using Organic Zinc-Rich Coatings

SSPC-Guide 15 Field Methods for Retrieval and Analysis of Soluble Salts on Steel and Other Nonporous Substrates

SSPC-Guide 16 Guide to Specifying and Selecting Dust Collectors

SSPC-Guide 17 Guide to Developing a Corporate Safety Program for Industrial Painting and Coating Contractors

SSPC-TU 1 Surface-Tolerant Coatings for Steel

SSPC-TU 2 Design, Installation, and Maintenance of Coating Systems for Concrete Used in Secondary Containment (NACE 6G197)

SSPC-TU 3 Overcoating

SSPC-TU 5 Accelerated Testing of Industrial Protective Coatings

SSPC-TU 6 Chemical Stripping of Organic Coatings from Steel Structures

SSPC-TU 7 Conducting Ambient Air, Soil, and Water Sampling During Surface Preparation and Paint Disturbance Activities

SSPC-TU 8 The Use of Isocyanate-Containing Paints as Industrial Maintenance Coatings

SSPC-TU 9 Estimating Costs for Protective Coatings Projects

SSPC-TU 10 Procedures for Applying Thick Film Coatings and Surfacings Over Concrete Floors

SSPC-TU 11 Inspection of Fluorescent Coating Systems

Steel tubes and fittings for steel tubes

Published standards of relevance to the oil & gas industry:

EN 10288 Steel tubes and fittings for onshore and offshore pipelines – External two layer extruded polyethylene based coatings

EN 10289 Steel tubes and fittings for onshore and offshore pipelines – External liquid applied epoxy and epoxy-modified coatings

EN 10290 Steel tubes and fittings for onshore and offshore pipelines – External liquid applied polyurethane and polyurethane-modified coatings

EN 10298 Steel tubes and fittings for on shore and offshore pipelines – Internal lining with cement mortar

EN 10300 Steel tubes and fittings for onshore and offshore pipelines – Bituminous hot applied materials for external coating

EN 10301 Steel tubes and fittings for on and offshore pipelines – Internal coating for the reduction of friction for conveyance of non corrosive gas

EN 10310 Steel tubes and fittings for onshore and offshore pipelines – Internal and external polyamide powder based coatings

EN 10329 Steel tubes and fittings for onshore and offshore pipelines – External field joint coatings

EN 10339 Steel tubes for onshore and offshore water pipelines – Internal liquid applied epoxy linings for corrosion protection

The following three standards emanating from the ISO/TC67 work are on the ECISS/TC29 programme for adoption:

prEN ISO 21809-1 Petroleum and natural gas industries – External coatings for buried or sub- merged pipelines used in pipeline transportation systems – Part 1: Polyole- fin coatings (3-layer PE and 3-layer PP) (ISO/DIS 21809-1)

prEN ISO 21809-3 Petroleum and natural gas industries – External coatings for buried or submerged pipelines used in pipeline transportation systems – Part 3: Field joint coatings

prEN ISO 21809-5 Petroleum and natural gas industries – External coatings for buried or sub- merged pipelines used in pipeline transportation systems – Part 5: External concrete coatings (ISO/DIS 21809-5)

The structure of ECISS/TC29 includes the following of interest:

ECISS/TC 29/SC 4 Coatings for steel tubes

ECISS/TC 29/SC 4/WG 15 Internal liquid epoxy lining

Export Destinations of our Sleeves