Technical Specification
Following are some of the technical specification used for pipe / insert sleeve coatings.
| Coating | Brief Information | Download pdf |
| 3M Scotchkote 134 FBE | Water and Wastewater Application |
 |
| 3M Scotchkote 345 | Liquid Phenolic Primer |
|
| 3M Scotchkote XC 6171 | Fusion Bonded Epoxy Coating |
|
| 7409 PhenGuard 930 |
Resistance to a wide range of organic acids, alchol, edible oils, fats & solvents
|
|
| 7435 PhenGuard 935 | Good resistance to hot water |
|
| 7436 PhenGuard 940 | Tank coating system for Chemical tankers |
|
| 7497 SigmaLine 2000 | To metal for pipe externals |
|
| Enviroline 405HT | Process vessels and tanks operating at high temperature |
|
| Hempadur 85671 | Water and chemical resistance |
|
| Interline 850 | To provide corrosion protection for the internals of steel storage tanks |
|
| Intertherm 228 | provide a corrosion resistant barrier |
|
| Interzone 954 | Cathodic disbondment resistance |
|
| Plasite 7159 PDS 1-07 | water-resistant epoxy coating polymerized with a polyamine type curing agent. |
|
| Plasite 7159 | High abrasion resistant version |
|
| Sigmashield 1200 | Water hull of ice going & ice breaking vessels | |
| Corvel 10-6051 | Used at elevated temperature and pressure in drill pipe, production tubing, valves and fittings |
|
| Corvel 10-8158 | is a melt-mixed, 100% solids thermosetting epoxy powder coating designed for coating the internal surface of pipe for use in the secondary recovery of oil. |
|
| Corvel EP-10 Primer IP-0010 | is a phenolic based-liquid coating designed for priming the inside of steel pipes prior to the application of high performance Resicoat® FBE powdercoating. |
|
| R4-ES HKF47R | R4-ES HKF47R is a spray applied Fusion Bonded Epoxy Coating designed for corrosion protection of earth-laid valves and fittings, hydrants, pumps and pipe drains. |
|
| Corvel 7P-0200 Primer | phenolic based liquid coating which provides excellent adhesion of fusion applied Resicoat® nylon powder coatings to ferrous and non-ferrous metal surfaces. |
|
| Pipe Internal Products | AkzoNobel Resicoat Pipe Internal Products |
|
| 702G Internal Pipe Coating System | 702G is a thermosetting epoxy powder coating engineered for use inside pipelines. It is typically applied over phenolic primers such as Valspar Pipeclad HXR0015. |
|
| Pipe Clad Phenolic Primer HXR0015 | is engineered to be applied as a universal primer on steel surfaces for interior pipeline coatings. It is compatible with fusion bonded epoxy (FBE) powder coatings, phenolic and phenolic/epoxy liquid coatings for applications on drill pipe, lined pipe and downhole tubing. |
|
| Hempadur Multi-Strength 35530 | is a solvent-free, two-component, high-build, polyamine cured epoxy paint, which cures to a coating with good resistance to fresh water, sea water, crude oil, and toabrasion. |
|
| RAM – 100 | RAM – 100 | |
| Sigma Novaguard 840 | Two-component, solvent-free, amine-cured novolac phenolic epoxy coating. |
|
| Hempel’s Curing Agent 97371 | It is used in Metal Industries, Ships and Shipyards, Industrial applications used by spraying. | |
| Hempadur Multi-Strength GF 35870 | HEMPADUR MULTI-STRENGTH GF 35870 is an amine-adduct cured epoxy coating – the product is reinforced with Glassflakes. It is a hard, impact and abrasion resistant coating with good resistance to sea water, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products.Suitable for early water exposure and will continue to cure under water. |
|
SSPC – The Society for Protactive Coating
| SSPC | Brief Information | Download PDF |
| SSPC AB 1 | Mineral and Slag Abrasives |
|
| SSPC AB 2 | Cleanliness of Recycled Ferrous Mettalic Abrasives |
|
| SSPC AB 3 | Newly Manufactured or Re-Manufactured Steel Abrasives |
|
| SSPC PA 1 | Shop, Field, and Maintenance Painting of Steel |
|
| SSPC PA 2 | Measurement of Dry Coating Thickness with Magnetic ages |
|
| SSPC PS GUIDE 1 | Guide for selecting Oil Base Painting Systems |
|
| SSPC PS GUIDE 2 | Guide for selecting Alkyd Painting Systems |
|
| SSPC PS GUIDE 3 | Guide for selecting Phenolic Painting Systems |
|
| SSPC PS GUIDE 4 | Guide for selecting Vinyl Painting Systems |
|
| SSPC PS GUIDE 7 | Guide for selecting One-Coat Shop Painting Systems |
|
| SSPC PS GUIDE 8 | Guide for Topcoating Zinc-Rich Primers |
|
| SSPC PS GUIDE 12 | Guide Zinc-Rich Coating Systems |
|
| SSPC PS GUIDE 15 | Guide for selecting Chlorinated Rubber Painting Systems |
|
| SSPC PS GUIDE 17 | Guide for selecting Urethane Painting Systems |
|
| SSPC PS GUIDE 19 | Guide for selecting Painting Systems for Ship Buttoms |
|
| SSPC PS GUIDE 20 | Guide for selecting Painting Systems for Boottoppings |
|
| SSPC PS GUIDE 21 | Guide for selecting Painting Systems for Topsides |
|
| SSPC SP 1 | Solvent Cleaning |
|
| SSPC SP 2 | Hand Tool Cleaning |
|
| SSPC SP 3 | Power Tool Cleaning |
|
| SSPC SP 5 | White Metal Blast Cleaning |
|
| SSPC SP 6 | Commercial Blast Cleaning |
|
| SSPC SP 7 | Brush-off Blast Cleaning |
|
| SSPC SP 8 | Pickling |
|
| SSPC SP 10 | Near-White Blast Cleaning |
|
| SSPC SP 11 | Power Tool Cleaning to Bear Metal |
|
| SSPC SP 12 | Surface Preparation and Cleaning of Steel and OtherHard Materials by High- and Ultrahigh-Pressure Water Jetting Prior to Recoating |
|
| SSPC SP 13 | Surface Preparation of Concrete |
|
National & International Standard
| Standard | Brief Information | Download PDF |
| Nace Standard RP0274 | High-Voltage Electrical Inspection of Pipeline Coatings |
|
| In-Situ Internal Epoxy Coating | In-Situ Epoxy Coating For Metallic Pipe |
|
| ASTM D-2240 | Standard Test Method for Rubber Property-Durometer Hardness |
|
| Liquid Epoxy Coating Pipeline | Liquid epoxy coatings for today’s pipeline coating challenges |
|
| Nace RP0188-2009 | Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates |
|
| SP0106-2006-Internal Corrosion | Control of Internal Corrosion in Steel Pipelines and Piping Systems |
|
| SSPC – AB3 | For newly manufactured steel abrasive or re-manufactured steel abrasive for use in surface preparation by blast cleaning |
|
| Nace RP-0287-2002 Surface Profile | Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape |
|
| Internal Epoxy Coating for Pipelines | the minimum requirements for internal flow coating of pipelines, with epoxy based material. |
|
| D4285 | Standard Test Method for Indicating Oil or Water in Compressed Air | |
| Nace 0175 | Metals for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments |
|
| RP-018194 | Liquid-applied internal protective Coatings for Oilfield Production Equipment |
|
| C686 | Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation | |
| NABL-104 | The specific criteria requirements for an electrical testing laboratory, in addition to the general requirements of ISO/ IEC 17025:2005. | |
| Nace No 1 SSPC SP5 | White Metal Blast Cleaning | |
| Nace No 2 SSPC SP10 | Near White Metal Blast Cleaning | |
| Nace No 3 SSPC SP6 | Commercial Blast Cleaning | |
| Nace No 4 SSPC SP7 | Brush-Off Blast Cleaning | |
| Nace No 5 SSPC SP12 | Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating | |
| Nace No 6 SSPC SP13 | Surface Preparation of Concrete | |
| Nace No 8 SSPC SP14 | Industrial Blast Cleaning | |
| Nace No 10 SSPC PA6 | Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Above ground Storage Tanks | |
| Nace No 11 SSPC PA8 | Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels | |
| Nace No 12 AWS C2.23M SSPC CS23 | Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel | |
SECTION 15076 – CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE
This Section designates the requirements for steel pipe fabrication, test in shop, installation of steel pipe, fabrication of steel sheet
or plate, mill-manufactured steel pipe, bends, special pipes with outlets, pass holes, flanges and all other fittings.
Reference Standard
| Coating | Brief Information | Download pdf |
| AWWA C200 | Steel Water Pipe 6-inches and larger |
|
| AWWA C205 | Cement-mortar protective lining and coating |
|
| AWWA C207 | Steel Pipe Flanges |
|
| AWWA C210 | Coal-tar epoxy coating system for interior and exterior of steel water pipelines |
|
| AWWA C213 | Fusion-Bonded epoxy coating for the interior and exterior of steel water pipelines |
|
| AWS | Standard Qualification Procedure for Manual Welding Operators | |
| ASME | Boiler and Pressure Vessel Code |
American Water Works Association – ANSI / AWWA C205-89
| ANSI / AWWA C205-89 | AWWA Standard for Cement-Mortar Lining and Coating for Steel Water Pipe – 4 IN. and Larger – Shop Applied. |
|
Export Destinations of our Sleeves
| MIDDLE EAST
» Saudi Arabia |
AFRICA
» Nigeria NORTH AMERICA » Usa |
EUROPE
» Russia |
ASIA
» India SOUTH AMERICA » Argentina |